Неспешно продам новые сервоприводы в оригинальной упаковке.
Список и количество
Savox SC-1258TG 10штук по 550гривен
Спецификация
Features:
- Light weight
- Coreless Motor provides high speed, incredible efficiency, and low power consumption
- Super strong titanium gears
- The Aluminum Case design not only looks good but also allows for lower operating temperatures.
- Totally Green – from materials to production, these servos are environmentally friendly.
- Ideal for CCPM on 600 and 700 class heli, steering servo on 1/10 scale Buggies.
*NOTE: Certain combinations of receiver and ESC have been found to cause "Brown Out" issues when combined with Savox servos. An external BEC, or BEC stabilizing receiver capacitor may be needed for efficient, glitch free operation in low voltage electric applications.
Specifications:
- Speed @ 6.0V: 0.08 sec/60°
- Torque @ 6.0V: 166 oz-in / 12 kg-cm
- Weight: 52.4g
- Bearing: Dual
- Type: Standard
- Gear: Titanium and Aluminum
- Case: Aluminum Heatsink
- Output Shaft: 25T Spline (Futaba)
- Case Size (LxWxH): 40.3x20x37.2mm
Savox SH-1257MG 5 штук по 500гривен
Спецификация
This is the SH-1257MG Super Speed Metal Gear Mini Digital Servo.
Features:
- The coreless motor and light weight design provides smoother, faster, and more efficient operation.
- The metal case design not only looks awesome but also allows for cooler and smoother operating temperatures.
- Metal gears form a solid framework for precise control and operation.
- Supports digital and analog control signals
- Ideal for rudder on 450 level helis, CCPM on 500 level helis, and steering servo on 1/12th scale cars.
Dimensions(mm): 35.0X15.0X29.2
Weight(g): 29.5
Speed(@4.8V sec/60): .09
Torque(@4.8V oz-in): 26.4
Speed(@6.0V sec/60): .07
Torque(@6.0V oz-in): 34.7
Gear: Metal
Bearing: 2BB
Case: Aluminum
25 Tooth Spline
Savox SH-1290MG 3 штуки по 500гривен
Спецификация
Features:
- Super High Resolution
- Water-Resistant w/4 silicone seals
- Coreless Motor provides high speed, incredible efficiency, and low power consumption
- The Aluminum Case design not only looks good but also allows for lower operating temperatures.
- Totally Green – from materials to production, these servos are environmentally friendly.
- Ideal as a rudder servo on 500, 600, and 700 class helis
*NOTE: Certain combinations of receiver and ESC have been found to cause "Brown Out" issues when combined with Savox servos. An external BEC, or BEC stabilizing receiver capacitor may be needed for efficient, glitch free operation in low voltage electric applications.
Specifications:
- Speed @ 6.0V: 0.04 sec/60°
- Torque @ 6.0V: 69 oz-in / 5 kg-cm
- Weight: 56.4g
- Type: Standard
- Gear: Metal
- Case: AluminumHeatsink
- Case Size (LxWxH): 40.3x20x37.2mm
Savox SB-2272MG 4 штуки по 800гривен
Спецификация
Features:
- Combines leading edge technology with super high 12 bit (4096) resolution and unique steel gears.
- Super light-weight.
- Brushless motor provides extremely high speed, incredible efficiency, and low power consumption.
- Extremely strong metal gears ensure long-life and durability.
- The full aluminum case design not only looks good but also allows for cooler and smoother operating temps.
- Totally green – from materials to production, these servos are environmentally friendly.
- Ideal for 1/10 trucks and buggies, as well as every control surface for giant scale aircraft and 700 class heli rudder applications.
*NOTE: Certain combinations of receiver and ESC have been found to cause "Brown Out" issues when combined with Savox servos. An external BEC, or BEC stabilizing receiver capacitor may be needed for efficient, glitch free operation in low voltage electric applications.
Specifications:
- Dimensions: 40.3x20.2x38.7mm
- Weight: 66g
- Speed:
- @ 4.8V: .05 sec/60
- @ 6.0V: .045 sec/60
- @ 7.4V: .032 sec/60
- Torque:
- @ 4.8V: 41.7 oz-in
- @ 6.0V: 69.4 oz-in
- @ 7.4V: 97.2 oz-in
- Gear: Metal
- Bearing: 2BB
- Case: Full Aluminum
- Output Shaft: 25 Tooth Spline
Hitec HS-8335SH 4штуки по 600гривен
Спецификация
+Pulse Width Control 1500usec Neutral
6.0-7.4 Volt Peak to Peak Square Wave
6.0-7.4 Volts
\-20° to +60° C (-4°F to +140°F)
Operating Speed (6.0V): ]0.16 sec/60° at no load
Operating Speed (7.4V): 0.13 sec/60° at no load
Stall Torque (6.0V):256.90 oz/in. (18.5 kg.cm)
Stall Torque (7.4V): 333.28 oz/in. (24 kg.cm)
Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable: [/color]No
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Motor Type: Coreless
Bearing Type: Dual Ball Bearings
Gear Type: Metal Gears
Connector Wire Length: 11.8” (30mm)
Dimensions: 1.57” x 0.79” x 1.45” (40 x 20 x 37mm)
Weight: 2.25oz (64g)
Futaba S9072SB 4штуки по 600гривен
Спецификация
Control System: +Pulse Width Control 1520usec Neutra
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.12sec/60 degrees at no load
Operating Speed (6.0V): 0.10sec/60 degrees at no load
Stall Torque (4.8V): 97oz/in. (4.5kg.cm)
Stall Torque (6.0V): 121 oz/in. (5.5kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Motor Type: Brush 3-Pole Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: All Metal Gears
Connector Wire Length: 12"
Dimensions: 1.56" x 0.81"x 1.43" (40 x 20 x 37mm)
Weight: oz. (57g)
Futaba BLS451 3штуки по 750гривен
Спецификация
Features
- Unparalleled response times – 30% faster than standard digital servos
- Less susceptible to the effects of vibration and/or shock — a problem that has hindered modelers for years
- Lower operating temperatures — for added longevity
- Specially treated gears that virtually eliminate slop and backlash
- Increased resolution – keeping the modeler "in-touch" with his model
- Samarium Cobalt magnets
- Dual ball bearings
- The same power consumption and centering as with brushed digital servos, with the same case size as typical standard-sized servos – they fit anywhere a standard Futaba
- Futaba 1-Year Warranty
Specifications:
Speed: .14 Sec/60 Degrees @ 4.8V - .10 Sec/60 Degrees @ 6V
Torque: 111 oz-in @ 4.8V - 147 oz-in @ 6V
Weight: 2.0 oz (57g)
Length: 1.6" (40.6mm)
Width: 0.8" (20.3mm)
Height: 1.4" (35mm)
Futaba BLS257 3 штуки по 550гривен
Спецификация
This is the Futaba BLS257 Brushless Mini Helicopter Tail Servo. Futaba has always been a leader in the race for innovations that get big results. Whether bringing exceptionally precise Silicon Micro Machining (SMM) technology to gyros or getting maximum speed, reliability and security out of 2.4GHz radio systems, Futaba is at the forefront of cutting edge RC technology. Now Futaba has done it again — by offering the first digital servos with the advantages of brushless technology. Futaba was the first, and is still considered the best!
The BLS257 was designed as a 4.8V rudder servo for 3D helicopter applications. This servo offers 30% faster response, with the same power consumption as digital servos that use standard brushed motors.
NOTE: When using this servo with the GY520, you must change to the correct mode in the gyro software.
Features:
- At least FIVE TIMES longer-lasting than brushed servos
- 30% faster response times
- Greater resistance to jolts and vibration
- Smoother operation
- Same power consumption as brushed digital servos
- Same compact case size as standard servos
- Exceptionally durable gear train
- Smooth dual ball bearings and strong Samarium Cobalt magnets
Specifications:
- Dimensions: 1.4 x 0.6 x 1.1" (35.5 x 15 x 28.6mm)
- Torque:
- @ 4.8V: 36 oz-in (2.6 kg-cm)
- Speed:
- @ 4.8V: 0.07 sec/60°
- Weight: 0.92oz (26g)
Futaba BLS155 2 штуки по 900гривен
Спецификация
Brushless Advantages:
- At least FIVE TIMES longer-lasting than brushed servos.
- 30% faster response times.
- Greater resistance to jolts and vibration.
- Smoother operation.
- Same power consumption as brushed digital servos.
- Same compact case size as standard servos.
- Exceptionally durable geartrain.
- Smooth dual ball bearings and strong Samarium Cobalt magnets
Control System:+Pulse Width Control
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: [/color]4.8-6.0V
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.19sec/60 degrees at no load
Operating Speed (6.0V): 0.15sec/60 degrees at no load
Stall Torque (4.8V): 200.0 oz/in. (14.4kg-cm)
Stall Torque (6.0V): 250.0 oz/in. (18.0kg-cm)
Motor Type: Brushless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearings
Gear Type: Metal
Connector Wire Length: 12"
Dimensions: 1.60” x 0.80” x 1.50” (40 x 20 x 36.8mm)
Weight: 2.26 oz. (64g)
Futaba S3070HV 4 штуки по 500гривен
Спецификация
This is the Futaba S3070HV S.Bus Programmable Metal Gear High Voltage Servo. This dual ball bearing servo features metal gears and is ideal for airplanes, helicopters, cars and boats. Futaba S.Bus High Voltage Servos are capable of using up to 2S LiPo's to maximize speed and torque. S.Bus compatibility adds the best in setup simplicity, while programmability provides the ultimate in performance tuning.
Specifications:
- Torque:
- @6.6V: 80.6 oz-in (5.8 kg/cm)
- @7.4V: 90 oz-in (6.5 kg/cm)
- Speed:
- @6.6V: 0.17 sec/60°
- @7.4V: 0.15 sec/60°
- Size: 1.57x0.79x1.50 in (40x20x38.1mm)
- Weight: 1.73 oz (49g)
- Power Supply: 6.0 - 7.4V DC
- Bearings: Dual
Причина продажи-желание вернуть вложенные деньги.
Предложения в личку либо по телефону в профиле.
